Lost Password?
No account yet? Register
 
Note: System may not recognize your e-mail if it is not set the same as your username. If you e-mail does not work, please send an e-mail to info@diy-boat.com and a customer service representative will look up your account within two business days.

Shopping Cart


Your Cart is currently empty.

Pressure Guard Print E-mail or Username
Since most marinas have city water pressure that exceeds 35 psi, if you leave your boat connected to dockside “city” water, protect your boat’s potable water system components by installing a water-pressure regulator on the water hose end or water inlet. This reduces water pressure down to 35 psi.

Never leave your boat unattended with the dockside pressure water feed on. There are lots of boat floodings on the books because of the failure of hose, a connection, etc. within the potable water system onboard that went unnoticed as the pressurized water from the dockside hookup flowed into the boat undetected.

 
< Prev   Next >
©2006-2008 - DIY Boat Owner. All Rights Reserved. Contact Us
Close